Tag Archives: meltflipper

Avaya, Inc.

7-300x“The MeltFlipper technology has completely changed how I look at potential profitability. The benefits I am particularly interested in is cost reduction, a larger processing window, and quality improvement. With the MeltFlipper technology, I was able to use one 16-cavity mold versus multiple low cavitation tools, and enjoy a 28 percent variability improvement.


Read More

Delphi Packard Electric Systems

10-300x“A primary objective at our Cortland facility is running with no blocked cavities. To achieve this goal, we’re putting the best technology into our molds, and the MeltFlipper technology is one of those technologies. It successfully addresses one of the largest factors that cause manufacturing to shut off cavities – defects related to unbalanced cavity filling.


Read More

Lord Corporation

11-300xWe saw a drastic difference when using the MeltFlipper technology. Without any additional work, the MeltFlipper technology reduced our filling imbalance to less than 25% of our original imbalance. I’m recommending that Lord Corp. make the MeltFlipper technology a standard part of all eight cavity molds.


Read More

Mass Tech Mold

12-300x“I was skeptical at first, but when you understand how the MeltFlipper technology works, it makes a lot of sense. When we first installed it in a mold, it solved our imbalance problem instantly. We plan to use it in all our molds with eight or more cavities.”


Read More

IM Solutions

13-300x“I recommend that for high-tolerance parts, my clients either limit themselves to four cavities, or use technologies like the MeltFlipper technology.”


Read More

OSRAM Sylvania Inc.

14-300x“We hold over 26 licenses to the MeltFlipper technology for molds from 4 to 16 cavities. There hasn’t been a situation yet where we haven’t seen benefits. BTI’s level of responsiveness to our needs equals that of our best suppliers. For anyone working with multi-cavity molds, I don’t see where it doesn’t make sense to utilize the MeltFlipper technology.”


Read More

Viking Plastics

15-300x“Before using the MeltFlipper technology, we were lucky to get four usable parts out of an eight cavity mold. We tried changing process, press size, press type – nothing worked. Now all cavities fill evenly, and an eight cavity mold makes eight good parts every time. Because of the MeltFlipper technology, we’ve doubled production, halved the amount of time we run the press, and significantly increased the process window.”


Read More

REXAM

25-300xWhen we sampled our first MeltFlipper mold, the process technicians, tool makers, and engineers wanted to bet me their paychecks that the MeltFlipper technology wouldn’t fix our imbalances. I wish I would have taken them up on it. I could understand their skepticism.


Read More