Testimonials

Seaquist Closures

17-300xThere were a good number of takeaways from the course, and it was definitely worth the trip. Beaumont has much to offer the industry, so please exercise discretion, and don’t let my competition know about your training seminars.


Read More

Northwestern Precision Manufacturing

18-300x“When Northwestern Precision Manufacturing needs mold filling simulation services, Beaumont Technologies is our first choice based on our good experiences over the years. I feel the use of outside filling simulation analysts needs to be looked at the same way you would pick a surgeon – Go to the experienced professional! …And some are better than others!”


Read More

Thogus Products Co.

19-300x“Your 5 Step Process software helped us direct our attention to the source of our problems and prevented us from doing any more damage by attempting to process them out and wasting more valuable time and money!”


Read More

Omni Mold Ltd., Singapore

23-300xOmni Mold needed to build a 48-cavity hot-to-cold runner system to produce a tight tolerance medical device molded component. The high cavitations and the complexity of the mold prompted Omni Mold’s engineers to contact Beaumont Technologies, Inc. (BTI) to provide mold filling and balancing solutions.


Read More

Miniature Precision Components

26-300x“The class was much more than I expected. Going in I was thought it would be more of a sales pitch for MeltFlipper technology. I was wrong. I now have a better understanding of polymer flow and how to use the systematic mold balance approach to help improve our molds and reduce our scrap cost. Great class, hope to attend other seminars at Beaumont.”


Read More

Innovative Injection Technologies

28-300x“I found the training to be of great value. Our initial discussions on foundational plastic flow characteristics, pressure drop, shear rate, Reynolds number and MFI vs. Capillary Rheometer curves led the way.


Read More

Caplugs, Inc.

31-300x“I found this Beaumont course very informative. I was amazed at the amount of expertise and knowledge presented in just two days. Many myths were debunked, numerous scientific explanations for the way we should be thinking about plastic flow were given, and various real-world examples were used to show how plastic flows, in addition to discussing the differences in runner sizes and shapes.


Read More

Thogus Products, Inc.

32-300x“Of all the training seminars that I have attended over the past 10 years, this one ranks at the top! The explanations of clamp tonnage, cooling strategies, viscosity, and key mold design components are just a few of the takeaways that will be very useful in my job function.”


Read More
WE'RE HIRING! AIM is hiring an Injection Molding Process Instructor  Learn More