Training Course Registration

Please complete the following form to send your training registration information to Beaumont Technologies. After reviewing your request, a representative will contact you to confirm registration and payment options.

Note: All courses are held in Erie, PA. For a list of prices, please refer to the "Training Schedule" on the left. Registration is at 8 a.m. on the day of the training; classes start at 8:30 a.m. and end at 4:30 p.m.; breakfast and lunches included.

PLEASE FILL OUT ALL FIELDS

Tell us about your company

Company
Address
Address2
City
State	Please chooseAlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyoming
ZIP
Country	Please chooseAlbaniaAlgeriaAndorraAntiguaArgentinaArmeniaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBhutanBoliviaBosnia and HerzegovinaBotswanaBrazilBruneiBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape VerdeCentral African RepublicChadChileChinaColombiaComorosCongoCosta RicaCote d'lvoireCroatiaCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEast TimorEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFijiFinlandFranceGabonThe GambiaGeorgiaGermanyGhanaGreeceGrenadaGuatemalaGuineaGuinea-BissauGuyanaHaitiHondurasHungaryIcelandIndiaIndonesiaIrelandIsraelItalyJamaicaJapanJordanKazakhstanKenyaKiribatiKorea, SouthKuwaitKyrgyzstanLaosLatviaLebanonLesothoLiberiaLiechtensteinLithuaniaLuxembourgMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMauritaniaMauritiusMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMoroccoMozambiqueNamibiaNauruNepalNetherlandsNew ZealandNicaraguaNigerNigeriaNorwayOmanPakistanPalauPanamaPapua New GuineaParaguayPeruPhilippinesPolandPortugalQatarRomaniaRussiaSaint Kitts and NevisSaint LuciaSt. Vincent and the GrenadinesSomoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSpainSri LankaSurinameSwazilandSwedenSwitzerlandTajikistanTaiwanTanzaniaThailandTogoTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTuvaluUgandaUkraineUnited Arab EmiratesUnited KingdomUnited States of AmericaUruguayUzbekistanVanuatuVatican CityVenezuelaVietnamYemenZambiaZimbabwe
Phone
Email
Number of Attendees

SELECT ALL COURSES YOU WANT TO ATTEND

Mold Start-up, Debug & Qualification

	July 6-7, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	November 6-7, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Hot & Cold Runner Systems

	May 29-30, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	August 21-22, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Injection Molding & Root Cause Analysis for QC/QA

	June 13, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	October 17, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Understanding Shrink & Warp

	June 5-6, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	August 28-29, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	December 11-12, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Mold Design for Project Engineers

	May 8-9, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	July 31- Aug 1, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	November 20-21, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Plastic Flow & Design Essentials for Mold Makers/Designers

	June 19-20, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public
	October 2-3, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Understanding & Applying Flow Simulation

	July 17-18, 2013 | 8 a.m. to 4:30 p.m. | Open to the Public

Student #1

Name
Title
Email

Student #2

Name
Title
Email

Student #3

Name
Title
Email

If you are sending more than 3 students, please include their information here. You may also add any questions or comments here.

Message

MAPP Member

	Check box to ensure MAPP Member cost reduction program discount.

If you have a Promo Code, Please enter it here. (Discounts from a Promo Code can not be applied with any other standing offer or discount.)

PROMO CODE

Cancellation Policy		I agree to pay 50% of the course cost should I fail to attend or notify Beaumont within three (3) business days of the training date, unless the training is otherwise cancelled by Beaumont. I understand that it is strongly suggested that I do not make any non-refundable reservations or travel arrangements. In the event of a cancellation by Beaumont, I understand that an email notification will be sent within three (3) business days of the training date and I agree that Beaumont is not responsible for any incidental expenses, including non-refundable travel costs. I further understand that Beaumont reserves the right to not accept my registration for any reason, including limitations on class size.

Training

Plastics Professional Series

• Mold Start-up, Debug & Qualification
• Hot & Cold Runner Systems
• Injection Molding & Root Cause Analysis for QC/QA
• Understanding Shrink & Warp
• Mold Design for Project Engineers
• Plastic Flow & Design Essentials for Mold Makers/Designers
• Understanding & Applying Flow Simulation
• Beaumont Course Registration

---

Autodesk Moldflow® Courses

• Insight Basic Training
• Insight Productivity Training
• Insight Performance Training
• Moldflow® Course Registration