Training Schedule

	Name	Start Date	End Date	Price
More Info	Seminar 1: Optimizing Mold Start-up, Debug & Qualification	01/18/2012	01/19/2012	$650
More Info	Seminar 2: Design Strategies for Engineering Hot & Cold Runner Systems	02/22/2012	02/23/2012	$650
More Info	Seminar 3: Injection Molding Diagnostics for Quality Personnel	03/08/2012	03/08/2012	$375
More Info	Seminar 4: Understanding Shrink & Warp for Successful Injection Molding	03/21/2012	03/22/2012	$650
More Info	Seminar 2: Design Strategies for Engineering Hot & Cold Runner Systems	04/25/2012	04/26/2012	$650
More Info	Seminar 1: Optimizing Mold Start-up, Debug & Qualification	05/09/2012	05/10/2012	$650
More Info	Seminar 5: Mold Design for Project Engineers	05/23/2012	05/24/2012	$650
More Info	Seminar 4: Understanding Shrink & Warp for Successful Injection Molding	06/13/2012	06/14/2012	$650
More Info	Seminar 3: Injection Molding Diagnostics for Quality Personnel	06/28/2012	06/28/2012	$375
More Info	Seminar 1: Optimizing Mold Start-up, Debug & Qualification	07/11/2012	07/12/2012	$650
More Info	Seminar 5: Mold Design for Project Engineers	07/25/2012	07/26/2012	$650

• All training seminars listed above are being held at Beaumont's headquarters in Erie, PA.

• Registration is at 8 a.m. on the day of the training; classes start at 8:30 a.m. and end at 4:30 p.m.; breakfast and lunches included.

• Discounts available for companies sending multiple students. Cost is non-refundable within seven days of the training date unless the training is cancelled by Beaumont.

Training